$ 28.99

JWT OBD1 B Series Budget Standalone Harness Kit with Adapter

$ 625.00

****OFFROAD USE ONLY****

*These generally have a 3-5 day lead time!*

MADE IN THE U.S.A!

We have offered these for some time now but haven't been able to get them online with a listing so here we go! Our budget B series engine harness kit is now easier than ever to order! This option is for the people that want to run their own switch panel/fuse box. Select which injectors you will be utilizing in the drop-down box. This kit utilizes a standalone adapter that plugs into the engine harness. With this kit, you will only have to hook up a few wires manually to fire your car up and everything function as it should. Instructions will be included with your purchase!

*JWT Standalone Pigtail Diagram for B, H, K Series and Ecotec Budget Harness*

Black - Ground

Red/white - Ignition Power

Green - Fan

Brown - Starter

Violet - Aux 1

Red/Blue - Constant battery power (Ecotec only, do not use for B, H, or K) *

This kit utilizes a base Rywire harness on the engine side. All connectors and materials are new. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a white identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. Our engine harnesses are 100% quality tested pin to pin; And resistance checked to ensure no voltage fluctuations.

All Rywire engine harnesses are made with OBD1 (92-95) computer connectors. A computer plug adapter can be used for OBD2 computers if necessary however our harness does not support USDM OBD2 computers. Aftermarket computers using OBD2 plugs and Non-US OBD2 computers are compatible (except for H22 and GSR stock computers).

***These engine harnesses are pre-built either ALL OBD1 or ALL OBD2. So if you have an OBD1 alternator but an OBD2 distributor, a jumper will be needed for the alternator or we can change the plug for you as it is only a single wire needed. Same can be done on the injector (if EV6 it is upcharge put we install new proper pins/plugs vs sending adapters for this option). Always order the harness around what distributor you have and let us know if the other plugs don't all match when ordering to ensure plug and play fitment when it arrives***