HondaRulez Coil On Plug Conversion Kit and Combo Kits
****OFF-ROAD USE ONLY****
This is a Honda/Acura "COP" Coil on Plug conversion kit. Simply send out your ECU to us and we will install the hardware for you! Please select if you need it to be for an OBD1 or OBD2 distributor as the pins are different on the two!
Helping your Car/Engine in many characteristics such as:
- Smoother idle
- Faster startups
- Better throttle response
- Increased MPG
- Increased reliability
- Increased Power
- Constant high intensity Spark throughout the rpm range
- Increases Dwell time compared to a single coil system (the length of time in distributor cam rotational degrees that the ignition module is turned on and the primary circuit of the ignition coil is being charged, more dwell time = a stronger discharge/spark)
- Fights spark blowout allowing for more boost and fuel esentially unleashing more power!
- Lower engine operating temperature
- Reduces and fights detonation burning fuel thoroughly
Our KIT includes:
- Plug and Play MilSpec Coil-on-Plug conversion harness
- Hondarulez COP mini board
- Free installation
Additional accessories/parts needed to successfully Run this Kit:
4x K20 or D17 ignition coils (K20 coils are the Most common and easiest to install on B and H series engines, D17 work best on D series engines using the D17 valve cover) sold separately
- Resistor type Spark plugs. sold separately
Optional accessories/parts to compliment the installation:
- Coil on plug mounting plate. sold separately
- Distributor Cap delete. sold separately
Our Kit is compatible with:
All USDM OBD1 ecu's (P28, P06, P72, P75, P30, ect) with tuning software such as but not limited to Hondata, EcTune, Neptune, and Chrome. Also works with a completely stock Ecu with an empty FC1 knock board slot like P06, P28 and P75.
Works with ALL B-Series (B16, B17, B18, B20), D-Series (D15, D16, D17), H-Series (H22,H23) and F-Series (F20,F22,F23) engines running OBD1 ecu.
Our kit has been successfully installed in Honda/Acura's ranging from years 1988-2001 Running OBD1 Ecu's like Honda Civic, Acura Integra, Honda Accord and Honda Prelude. (Kit might also work on many other "Custom" applications running Honda engine with Honda Ecu as mentioned above)
Our kits are ready to ship! Simply send your ecu out to us so we can install/solder the Hondarulez Cop mini and ship back along with our kit ready for you to Plug and Play. Please give us 2-3 business days to ship your kit out after we have received and serviced your ECU. We can also provide an ECU to install this in with whatever software you desire at additional cost!
WARNING: Make sure to use Resistor type sparkplugs ONLY.
This Product is for OFF-ROAD USE ONLY!!